What's in the box
* main unit + gun + power cord
* guide
* soldering iron
* soldering iron holder +gun frame
* 4 nozzles
*1pcs IC pick-up
What's in the box
* main unit + gun + power cord
* guide
* soldering iron
* soldering iron holder +gun frame
* 4 nozzles
*1pcs IC pick-up
Main function
1.WEP853D 5A 3 in 1 hot air soldering station with hot air gun and 30V 5A DC power supply . Improve your working efficiency. Better organize. Save time, save space and save energy. The three sections have their own switches, can work independently or together.
2. The heart of this station is Dual-core microcomputer processor and PID technology to trace temperatures on air gun and iron in real time and compensate temp precisely and quickly by built-in PID control program. So keeping temperature stability within 1oC and quick temperature rising to set value. ESD design on soldering iron section can protect sensitive components.
3. Designed for SOIC, CHIP, QFP, PLCC, BGA and temperature-sensitive components. Soldering iron with anti-static design to prevent electrostatic damage on dedicated SMA components. Very good for electronics product, such as cell phones and smart handsets repair.
4. The power supply is high-precision DC power supply with Constant Voltage and Current, output voltage:0-30V DC adjustable, output current :0-5A adjustable, Power supply with overload protection, high accuracy, reliability, designed for scientific research, product development, laboratories, schools, portable computer repair, electronics production lines etc.
5. Enhanced safety features. Full intelligence self-detection functions on air gun and iron to provide safe operation mode. Sensor on handle leads to operating mode (high temp) when picked up or to standby mode (low temp) when laid down. Avoid accident caused by human mistake.
6. The air gun automatically enters standby when the temperature is less than 70oC threshold.
7. With short circuit, open circuit, over-temp and over-load protection.
8. Automatic cooling function for effectively prolonging the heater's life and protecting the hot air gun.
9. Fits for heating shrink, drying, lacquer removal, viscosity removal, ice-out, pre-heating and glue soldering.
10. CE approved.
Rated Voltage | AC 220V±10% 50Hz | ||
Total Power | ≤1000W | ||
300℃ Constant Temperature Power (High-Speed PID Programmed to Energy Savings) | 250W±10% | ||
Operating Environment | 0~40℃ Relative Humidity<80% | ||
Storage Temperature | -20~80℃ Relative Humidity<80% | ||
Dimensions |
| ||
Weight | 7.26kg | ||
parameters | |||
Rated voltage | AC 220V±10% 50Hz | ||
Total power |
≤1000W | ||
300℃The thermostat power of (high-speed PID programmable energy saving) | 250W±10% | ||
Working environment | 0~40℃ relative humidity<80% | ||
Storage environment | -20~80℃ relative humidity<80% | ||
Dimensions |
| ||
Weight | 7.26KG | ||
Parts parameters | Hot air rework | Soldering iron | |
Operating Voltage | AC 220V±10% 50Hz | AC 26V±10% 50Hz | |
Output power | 720W | 75W | |
Temperature range | 100℃~480℃ | 200℃~480℃ | |
Air Supply Mode | Brushless-Motor Fan | --- | |
Air Flow | 120L/min(MAX) | --- | |
Temperature Stability | ±1℃ (Static) | ±1℃ (Static) | |
Display Type | Red LED display | Red LED display | |
Calibration Mode | The PID digital program
proofreading | The PID digital program
proofreading | |
PID Temperature Calibration Cycle | Rapid 20ms | High-Speed 100ms | |
Heating Core | Ceramic columned heating element. | Imported heater | |
Standard nozzles/tips | (10mm,8mm,5mm,13mm) 4 PCS nozzles | B | |
Tip ground impedance | --- | <2Ω | |
Tip of ground voltage | --- | <2mV | |
Power Supply | |||
Operating Voltage | 0~30V | ||
Output Power | 0-5A | ||
Protection Mode | Short Circuit Over current | ||
Voltage Display Mode | Red LED Digital Display | ||
Current Display Mode | Red LED Digital Display | ||
Load Stability | <0.01±2mv | ||
Ripple and Noise | <1mv rms (RMS) |