1.Using microcomputer processor PID programmable temperature control technology.

2.Preheating station is to use a glaze layer having a high thermal effect, good thermal shock resistance of the ceramic as the substrate, high quality nickel branded alloy wire once sintering.It has a high thermal effect, overall good, good thermal stability, uniform heating, high dielectric strength, clean, easy to install and so on features.

3.Air Gun heater use ceramic heater. Heating elements firmly wrapped around the model ceramic, rapid and uniform heating. Use the upgraded version fan, the airflow larger than the ordinary fan, spiral out of the wind, long life.

4.Soldering iron part using Imported heater. Heating up rapidly, temperature stability, long service life; antistatic design to prevent electrostatic damag to delicate SMD components.

5.The machine has a self-test function. Full intelligent over-temperature, short-circuit, open circuit, overload and fault display and protection functions.

6.853AAA preheating station using the user-friendly design. The cover affixed with a high temperature, insulated protection pads to prevent scalding operation. Uses magnetic induction technology. Card board bracket to prevent protective pads suck hood above. Can rotate 360 degrees, flexible card board. It is suitable for the circuit boards of different shapes and sizes.

7.853AAA temperature correction function. Adapt to the environmental impact, or replace the heating elements, soldering iron tips etc. spare parts caused by temperature deviation,can use this function calibration temperature. The correction temperaturerange is -50 °C ~ +50 °C.

8.853AAA has Celsius / Fahrenheit temperature display function. Meet different market needs to design the temperature display mode, you can choose under customary interest.

9. 853AAA hot air gun part have add to auto./manual function.

Voltage AC220C±5%

Max power consumption 1270W

Preheating station parts

Temperature Range 50~400 °c / 152~752 °F

Temperature Stability ±2 °c

Display Type LED

Area 120*120mm

Hot Air Reworks parts

Airflow type brushless fan spiral out wind

Air Flow ≤120L/min

Temperature Range 100 °c -480 °c /212°F ~896 °F

Temperature Stability  ±1 °c

Display Type LED

Handle cable length ≥100cm

Soldering Iron parts

Temperature Range 200 °c -480 °c /392°F~896 °F

Soldering iron heater :imported large power heater

Solder iron holder blue Ferro-alloy iron holder

Soldering iron handle Blue iron handle

Temperature Stability ±1°c

Tip of ground voltage <2mv<>

Tip ground impedance <2 ohm

Display Type LED

Handle cable length ≥100cm

NOTE:Due to shippment cann't contain rosin,so the tip cleanner box don't have rosin inside.

YIHUA 853AAA bga rework station standard package:

Inner box size  37*38*18cm

Outer carton box size  73*40*39cm

Q'TY  4pcs/ctn

Goods net weight  5.54kg/pc

outer carton weight  23.41kg