1.Soldering iron part using Imported heater，heating up rapidly, temperature stability, long service life; antistatic design to prevent electrostatic damag to delicate SMD components.

2.The machine has a self-test function.full intelligent over-temperature, short-circuit, open circuit, overload and fault display and protection functions.

3.853AAA temperature correction function

Adapt to the environmental impact, or replace the heating elements, soldering iron tips etc. spare parts caused by temperature deviation,can use this function calibration temperature.

The correction temperaturerange is -50 °C ~ +50 °C.

4.853AAA has Celsius / Fahrenheit temperature display function

Meet different market needs to design the temperature display mode, you can choose under customary interest.

5. 853AAA hot air gun part have add to auto./manual function .

Voltage AC220C±5%

Max power consumption 1270W

Preheating station parts

Temperature Range 50~400 °c / 152~752 °F

Temperature Stability ±2 °c

Display Type LED

Area 120*120mm

Hot Air Reworks parts

Airflow type brushless fan spiral out wind

Air Flow ≤120L/min

Temperature Range 100 °c -480 °c /212°F ~896 °F

Temperature Stability  ±1 °c

Display Type LED

Handle cable length ≥100cm

Soldering Iron parts

Temperature Range 200 °c -480 °c /392°F~896 °F

Soldering iron heater :imported large power heater

Solder iron holder blue Ferro-alloy iron holder

Soldering iron handle Blue iron handle

Temperature Stability ±1°c

Tip of ground voltage <2mv<>

Tip ground impedance <2 ohm

Display Type LED

Handle cable length ≥100cm

NOTE:Due to shippment cann't contain rosin,so the tip cleanner box don't have rosin inside.